GLOQ1B-I automatic load transfer switch

1,GLOQ1B-I is the most popular product with its competitive price. 2, rated current up to 125A 3,high quality.

Detailed Product Description

 GLOQ1B-I  Automatic Transfer Switching

 GLOQ1B-I type product is a new generation of PC switches adopting coil instantoperation. Compared with the traditional switch which adopts motor drive for conversion,it has the advantages of simple structure, fast conversion speed (time<80ms) and so on.In addition, the main contact system is a SPDT (V-type) structure, which will not connectwith two powers at the same time even in the emergent situation.

Application range

The rated insulation voltage of the product is 690V, the rated frequency is 50/60Hz,the rated voltage is 400VAC and the rated current is 10A-125A. The product is mainlyused for the conversion of emergency power supply system between two powers soas to ensure the important load (for example, firefighting load) can continuously andreliably operate. Mainly used for the nationally specified first-grade current, the productis applicable to the occasions requiring continuous normal power supply such as highrisebuilding, post and firefighting, coalmine and shipping, chemical metallurgy, industrialproduction line, medical sanitation, military facilities, etc.

 

Application conditions

 

Ambient air temperature:

The upper limit shall be not more than +55°C;

The lower limit shall be not less than -25°C;

The maximum daily mean temperature shall be not more than +35°C and the relativehumidity shall be nor more than 90%;

The user shall negotiate with the manufacturer if the ambient air temperature is morethan +55°C or less than -25°C.

The altitude of the installation place shall be not more than 2,000m;

The pollution level of the installation place shall be III;

The installation classification shall be III;

The use classification of the main loop is AC-33B (6le) and the electric motor hasmixed load;

Installation conditions:The switch body can be vertically or horizontally arrangedand the installation gradient shall be not more than ±22.5°. The controller is panelinstallation.

Flashover distance:The flashover distance is 80mm when AC voltage is 400V and 100mm when ACvoltage is 690V

 

Main functions:

 

Indicating present access power state;Indicating present input working power state;Indicting fault state (under-voltage, over-voltage and loss phase) + buzz alarm prompt;Indicating automatic state and manual state (with power-down memory);Indicating delay process state;Achieving manual/automatic conversion;Providing 0~60s adjustable delay for power conversion;Automatically testing any power fault state (under-voltage, over-voltage and loss phase) and inputting alarm;Arbitrarily switching A power output or B power input under the manual state;Optimally selecting A power or B power as the main power.The control mode can be arbitrarily set:1.Automatic change and automatic recovery mode;2.Automatic change and non-automatic recovery mode;3.Generator power supply mode.

 

 

 

 

GLOQ1B-I automatic load transfer switch